Color Reference Cards are printed for agencies, printers, publishers, separators ...anyone who wants to control color reproduction quality!
 
Picture of the productT-Reference Card
T-Ref is a printed Standard Reference Material (SRM) for agencies, printers, publishers, separators ...anyone who wants to control color reproduction quality! T-Ref consists of a printed sample of white, yellow, cyan, magenta, and black circular SWOP ink patches, with readings calibrated to the ANSI Status "T" response, and with calibration traceable to National Institute of Science and Technology primary references.

Measure the color patches on your wide-band Status "T" densitometer and compare the readings against T-Ref's calibrated values. If they don't match, you should review the results with densitometer's manufacturer for possible re-calibration. By using the T-Ref you will be assured that your densitometer is reading as accurately as possible and can determine inter-instrument agreement within your plant or between companies.

T-Ref was re-modeled to be the first reference material to comply with CGATS.11 and is an essential component of any ISO9000 program. Both T-RefTM and Enhanced T-RefTM consist of a laminated card packaged in a protective folder.


Price: 125.00
Member price: 80.00
Quantity   

 View Cart
PMT-REF
Picture of the productLab Reference Card
Lab Refÿ is designed to allow colorimeter, spectrophotometer, and hybrid color measurement device users to verify that their equipment can measure colors accurately in terms of CIE specified values. Subtle differences in the design, calibration, and operation of this equipment can lead to different units yielding different colorimetric values, even when measuring the same sample. In turn, the difference in these values can create uncertainty about the accuracy of any one unit as well as confusion in the communication of CIE data.

As the industry's objective third-party L*, a*, b* reference, Lab Ref eliminates confusion and allows confident exchange of CIE data from all pieces of equipment verified with it. Available in 6mm (shown) and 36mm spot sizes. Targets include paper white, black, primary colors (cyan, magenta, and yellow), secondary colors (process red, process green, process blue), tertiary colors (three-color gray), and selected other hues (brown, purple and pastel) from different regions of the reproducible color gamut in order to provide a rigorous check of a color measurement device's capabilities.

Printed on 80 pound Carolina C1S free sheet stock. Rigorous analysis of this sheet reveals no fluorescence of significance. Printed with inks measured as being in conformance with Specifications for Web Offset Publications (SWOP). As specified in ANSI/ISO standards, each Lab-Ref is under printed with a black backing of not less than 1.30 density. Laminated for protection with a material that is transparent and has very little near-ultraviolet absorption.


Price: 265.00
Member price: 195.00
Quantity   

 View Cart
PMLREF
Picture of the productEnhanced T-Reference Card
Enhanced T-Refÿ includes both Status "T" and Status "E" certified readings. Status "E" is the ANSI standard for European wideband transmission densitometer response. With the Enhanced T-Ref you can use this SRM to check your transmission densitometers for both North America and European customers. Both T-Ref and Enhanced T-Ref consist of a laminated card packaged in a protective folder.

Price: 145.00
Member price: 90.00
Quantity   

 View Cart
PMT-REFE
Picture of the productCustom X-Rite T-Ref
Custom X-Rite T-Refÿ is a printed Standard Reference Material (SRM) for agencies, printers, publishers, separators ...anyone who wants to control color reproduction quality! The Custom X- Rite T-Ref consists of a printed sample of white, yellow, cyan, magenta, and black square SWOP ink patches, with readings calibrated to the ANSI Status "T" response, and with calibration traceable to National Institute of Science and Technology primary references. This custom X- Rite T-Ref can be used on X-Rite's scanning densitometers or spectrophotemeters as well as their strip reader, DTP41.

This calibration card should not be used for reflectance densitometers (see T-Ref). Measure the color patches on your X-Rite Status "T" densitometer and compare the readings against T-Ref's calibrated values. If they don't match, you should review the results with densitometer's manufacturer for possible re-calibration. By using the Custom X-Rite T-Ref you will be assured that your densitometer is reading as accurately as possible and can determine inter-instrument agreement within your plant or between companies.

T-Ref was re-modeled to be the first reference material to comply with CGATS.11 and is an essential component of any ISO9000 program. Please note: As this is a custom color reference card, orders will take at least one to two weeks to be measured and shipped out.


Price: 140.00
Member price: 90.00
Quantity   

 View Cart
PMT-REFX
Picture of the productCustom X-Rite Ref 2.0 (Status T & E, LAB, Spectral)
Custom X-Rite T-Ref is a printed Standard Reference Material (SRM) for agencies, printers, publishers, separators ...anyone who wants to control color reproduction quality! The Custom X- Rite T-Ref consists of a printed sample of white, yellow, cyan, magenta, and black square SWOP ink patches, with readings calibrated to the ANSI Status "T" and Status "E" response, Spectral wavelength, and LAB, and with calibration traceable to National Institute of Science and Technology primary references. This custom X- Rite T-Ref can be used on X-Rite's scanning densitometers or spectrophotemeters as well as their strip reader, i1iSis and DTP41.

This calibration card should not be used for reflectance densitometers (see T-Ref). Measure the color patches on your X-Rite Status "T" densitometer and compare the readings against T-Ref's calibrated values. If they don't match, you should review the results with densitometer's manufacturer for possible re-calibration. By using the Custom X-Rite T-Ref you will be assured that your densitometer is reading as accurately as possible and can determine inter-instrument agreement within your plant or between companies.

T-Ref was re-modeled to be the first reference material to comply with CGATS.11 and is an essential component of any ISO9000 program. Please note: As this is a custom color reference card, orders will take at least one to two weeks to be measured and shipped out.


Price: 185.00
Quantity   

 View Cart
PMT-REFX2